0

Shaped tubes and hollow sections

The welded shaped tubes are used in constructions of all kinds and offer an excellent price/performance ratio.

Hollow sections are mainly used in the construction industry and are produced and supplied in accordance with the EN 10210 (hot rolled) and EN 10219 (cold rolled) standards. The customer thus has a quality product at his disposal.

Seamless sectional steel tubes

According to EN 10305-1, grade E235+C

Dimensions

from:  15.00 x 15.00 x 2.00 mm
to     :  70.00 x 70.00 x 4.00 mm

Seamless hexgonal steel tubes

According to EN 10305-1, grade E235+C

Dimensions

from: 22.00 x 17.00 x 2.50 mm
to     : 59.00 x 50.00 x 4.50 mm

Welded sectional steel tubes

According to EN 10305-5, grade E235+CR S1/S2

Dimensions

from:   15.00 x 10.00 x 1.50 mm
to     : 150.00 x 50.00 x 3.00 mm

Hollow sections hot rolled

According to EN 10210-1, grade S355J2H (square and rectangular)

Dimensions

from:    40.00 x   40.00 x   4.00 mm
to     : 500.00 x 300.00 x 16.00 mm

Hollow sections cold finished

According to EN 10219-1, grade S275J2H or S355J2H (square and rectangular)

Dimensions

from:   40.00 x   40.00 x    4.00 mm
to     : 300.00 x 300.00 x 10.00 mm

Are you sure about this?