0

Stainless steel

Corrosion-resistant tubes and steel bars (stainless steel) in numerous materials (alloys) in almost all shapes and dimensions customary on the market.

Stainless steel is used to meet higher requirements for corrosion and acid resistance. These materials are usually used without further surface treatment.

Stainless steel round

according EN 10088-3, premachined/peeled,, cold drawn h9 and grinded h8 or h9

Stainless steel square

according EN 10088-3, hot-rolled, cold drawn h11

Material: 1.4301

cold drawn h11

d 10.00 x 10.00 mm - 50.00 x 50.00 mm

Stainless steel flat

according EN 10088-3, hot-rolled, cold drawn h11

Werkstoff: 1.4301

hot rolled

La 10.00 to 120.00 mmLb 3.00 to 20.00 mm

cold drawn h11

La 10.00 to 120.00 mmLb 3.00 to 20.00 mm

Stainless steel hexagonal

according EN 10088-3, cold drawn h11

Werkstoff: 1.4301

Werkstoff: 1.4305

Werkstoff: 1.4404

Stainless steel hollow-bars

according EN 10216-5, EN 10294-2, EN 10297-2

Werkstoff: 1.4301

hot rolled

AD 63.00 - 236.00 mm
s 5.50 - 43.00 mm

hot rolled

AD 32.00 - 56.00mm
s 5.50 - 12.50 mm

Stainless steel round tubes

according to EN 10216-5, EN ISO 1127 (partial tolerances according to EN 10305-1)

Werkstoff: 1.4301

Hydraulic tubes seamless

AD 6.00 - 42.00 mm
s 1.00 - 5.00 mm

Conduit tubes seamless

AD 6.00 - 406.40 mm
s 0.50 - 23.01 mm

Conduit tubes welded

AD 6.00 - 711.20 mm
s 1.00 - 12.70 mm

Decoration tubes, welded

AD 10.00 - 168.30 mm
s 1.00 - 3.00 mm

Werkstoff: 1.4404

Hydraulic tubes seamless

AD 6.00 - 42.00 mm
s 1.00 - 5.00 mm

Conduit tubes seamless

AD 6.00 - 406.40 mm
s 0.50 - 23.01 mm

Conduit tubes welded

AD 6.00 - 813.00 mm
s 1.00 - 12.70 mm

Decoration tubes, welded

AD 21.30 - 60.30 mm
s 2.00 - 2.00 mm

Werkstoff: 1.4571

Hydraulic tubes seamless

AD 6.00 - 42.00 mm
s 1.00 - 3.00 mm

Conduit tubes seamless

AD 6.00 - 323.90 mm
s 1.00 - 14.20 mm

Conduit tubes welded

AD 6.00 - 711.20 mm
s 1.50 - 6.35 mm

Decoration tubes, welded

AD 33.70 - 48.30 mm
s 2.00 - 2.00 mm

Are you sure about this?