Material

Hard chromium plated steel bars, quality 42CrMo4+QT, Tol. f7

Nickel and chrome plated piston rods, base material 20MnV6, nickel layer thickness min. 30My, chrome layer thickness min 25My, tol. f7/f8

Hard chromium plated steel bars, inductiv hardened, 42CrMo4+QT, Tol. f7

Hard chromium plated steel bars, inductiv hardened, C45E / C45 / C50 / CK45 / 38MnVS6, tol. f7

Hard chromium plated steel bars, quality 20 Mn V6, Tol. f7

cold drawn round steel, 42CrMoS4+QT+C/SH (1.7225 / 1.7227), tol. h9

case hardened steel, round, hot-rolled, C15E, grd. 1.1141, after EN ISO 683-3 (EN 10084) / tolerances EN 10060

case hardened steel, round, hot-rolled, 15NiCr13+A, Wst 1.5752, after EN ISO 683-3 (EN 10084) / tolerances EN 10060

case hardened steel, round, hot-rolled, 18CrNiMo7-6+A (partially +FP), grd. 1.6587 after EN ISO 683-3 (EN 10084) / tolerances EN 10060

case hardened steel, round, hot-rolled, 16MnCr(S)5 (partially +A), grd. 1.7131/1.7139 after EN ISO 683-3 (EN 10084), tolerances EN 10060

Cold drawn high strength steel, ETG 100

Tolerances: 6.00 mm to 64.00 mm h11 from 64.00 mm to 70.80 mm h12

nitrided steel, round, hot-rolled, 31CrMoV9+QT, grd. 1.8519 after EN 10085 / tolerances EN 10060

nitrided steel, round, hot-rolled, 34CrAlNi7-10+QT, grd. 1.855 after EN 10085 / tolerances EN 10060

Anti-frictionbearing steel, round, hot-rolled, 100Cr6+AC, grd. 1.3505 after EN 683-17 / tolerances EN 10060

heat resistantpressure-vessel steelroundhot-rolled, 16Mo3, grd. 1.5415 after EN 10273, tolerances after EN 10060

structural steel, round, hot-rolled, S355J2, EN 10025-2, tolerances EN 10060

structural steel, round, hot-rolled, S355J2+N, after EN 10025-2 / tolerances EN 10060

Stainless steel round bar MatNr. 1.4301, hot rolled, solution annealed EN 10088-3, EN 10060, premachined/peeled, plustolerances

Stainless steel round bar, MatNr. 1.4301, grinded h9,solution annealed

Stainless steel round bar, MatNr. 1.4404, hot rolled, solution annealed EN 10088-3, EN 10060, premachined/peeled, plustolerances

Stainless steel round bar, MatNr. 1.4305, hot rolled, solution annealed EN 10088-3, EN 10060, premachined/peeled, plustolerances

Stainless steel round bar, MatNr. 1.4305, grinded h9, solution annealed

Stainless steel round bar, MatNr. 1.4104, grinded h9, annealed

Looser Aluminium bronze 75 (LAB 75) round CuAl10Ni5Fe4 Din EN 12163/12167/12420/1653, CW307G (2.0966)

Stainless steel round bar, MatNr. 1.4057, hot rolled, EN 10088-3, EN 10060, premachined/peeled, plustolerances

Stainless steel round bar, MatNr. 1.4112, hot rolled, annealed EN 10088-3, EN 10060, premachined/peeled, plustolerances

Looser Aluminium Bronze 79 (LAB79) round CuAl10.5Ni5.1Fe4.8

Caro bronze round CuSn8P DIN EN 12163

Solid rod, Métafram BP 25

Solid rod, Métafram FP 20

Electrode Material Round bar CuCo2Be DIN EN 12163

Laiton spécial Looser 22 round CuZn37Mn3Al2PbSi DIN EN 12164

Caro bronze round tube CuSn8P DIN EN 12163

Caro bronze round tube CuSn8P DIN EN 12163

Cold drawn high strength steel, ETG 100

Tolerances: 6.00 mm to 64.00 mm h11 from 64.00 mm to 70.80 mm h12

Looser Bronze 50 (LB 50) round tube CuSn7Zn4Pb7-C-GC DIN EN 1982

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Looser Bronze 65 (LB 65) round tube CuSn12-C-GC DIN EN 1982,

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Stainless steel hollow bar, Mat-Nr. 1.4301, EN 10216-5 TC1, tolerances according to EN 10294-2

Looser Bronze 50 (LB 50) round tube CuSn7Zn4Pb7-C-GC DIN EN 1982

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Looser Bronze 50 (LB 50) round tube CuSn7Zn4Pb7-C-GC DIN EN 1982

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Looser Bronze 65 (LB 65) round tube CuSn12-C-GC DIN EN 1982,

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Looser Bronze 50 (LB 50) round tube CuSn7Zn4Pb7-C-GC DIN EN 1982

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Looser Bronze 65 (LB 65) round tube CuSn12-C-GC DIN EN 1982,

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Looser Bronze 50 (LB 50) round tube CuSn7Zn4Pb7-C-GC DIN EN 1982

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Looser Bronze 65 (LB 65) round tube CuSn12-C-GC DIN EN 1982,

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Stainless steel hollow bar, Mat-Nr. 1.4301, EN 10216-5 TC1, tolerances according to EN 10294-2

Looser Bronze 50 (LB 50) round tube CuSn7Zn4Pb7-C-GC DIN EN 1982

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Looser Bronze 50 (LB 50) round tube CuSn7Zn4Pb7-C-GC DIN EN 1982

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Looser Bronze 65 (LB 65) round tube CuSn12-C-GC DIN EN 1982,

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Looser Bronze 50 (LB 50) round tube CuSn7Zn4Pb7-C-GC DIN EN 1982

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Looser Bronze 50 (LB 50) round tube CuSn7Zn4Pb7-C-GC DIN EN 1982

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Looser Bronze 50 (LB 50) round CuSn7Zn4Pb7-C-GC DIN EN 1982

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Looser Bronze 65 (LB 65) round CuSn12-C-GC DIN EN 1982

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Looser Aluminium bronze 75 (LAB 75) round CuAl10Ni5Fe4 Din EN 12163/12167/12420/1653, CW307G (2.0966)

Lead Bronze Looser 80 round CuSn7Pb15-C-GC DIN EN 1982

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Looser Bronze lead 82 (LBB 82) round CuSn10Pb10-C-GC DIN EN 1982

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Lobrodur 18 round CuNi2Si DIN EN 12163

Looser Bronze 50 (LB 50) Round bar Pb-free CuSn7Zn3Ni2PS-C DIN EN 1982

Kaltarbeitstahl, Wst 1.2379, X153CrMoV12

Kaltarbeitstahl, 1.2842, geglüht

Warmarbeitsstahl, Wst 1.2343

Kunststoffformenstahl, Wst. 1.2312

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cylindrical bearing, Métafram BP 25

Cylindrical bearing, Métafram BP 25

Cylindrical bearing, Métafram BP 25

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Looser Aluminium bronze 75-1 (LAB 75-1) round tube, CuAl10Fe5Ni5-C-GC or GZ DIN EN 1982

Looser Aluminium bronze 75-1 (LAB 75-1) round tube, CuAl10Fe5Ni5-C-GC or GZ DIN EN 1982

Looser Bronze lead 80 (LBB 80) round tube CuSn7Pb15-C-GC DIN EN 1982

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Looser Aluminium bronze 75-1 (LAB 75-1) round tube, CuAl10Fe5Ni5-C-GC or GZ DIN EN 1982

Looser Bronze lead 80 (LBB 80) round tube CuSn7Pb15-C-GC DIN EN 1982

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Wotan Bronze AKS 59 round CuAl9Fe4Ni1

Caro bronze round tube CuSn8P DIN EN 12163

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn cylinder tubes, St 52 / 52.2 or accordingly E355, stressrelieved / roller burnished, bore tolerance H8 / H9, bore surface finish 0.4 my Ra

Hot rolled seamless heavy wall tubes, EN 10297-1, E355 partially DIN EN 10210-1, S355J2H

Hot rolled seamless heavy wall tubes, EN 10297-1, E355 partially DIN EN 10210-1, S355J2H

Hot rolled seamless heavy wall tubes, EN 10297-1, E355 partially DIN EN 10210-1, S355J2H