Product

Wieland-B09-ST Cylindrical bushing

Wieland-B09-LD Flanged bushing

Permaglide P10/P14 Cylindrical bushing

Looser bearing LG 41 Cylindrical bushing

Looser bearing LG 41 Cylindrical bushing

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn cylinder tubes, St 52 / 52.2 or accordingly E355, stressrelieved / roller burnished, bore tolerance H8 / H9, bore surface finish 0.4 my Ra

BIMETAL tubes material TOKAT 50 bronze on steel E235 or E355 In Fixlengths of 500 mm

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Hot rolled seamless heavy wall tubes, EN 10297-1, E355 partially DIN EN 10210-1, S355J2H

Hot rolled seamless heavy wall tubes, EN 10297-1, E355 partially DIN EN 10210-1, S355J2H

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Hot rolled seamless heavy wall tubes, EN 10297-1, E355 partially DIN EN 10210-1, S355J2H

Seamless hollow bars for machining EN 10294-1, E470

Seamless hollow bars for machining EN 10294-1, E470

Hot rolled seamless heavy wall tubes, EN 10297-1, E355 partially DIN EN 10210-1, S355J2H

Hot rolled seamless heavy wall tubes, EN 10297-1, E355 partially DIN EN 10210-1, S355J2H

Seamless hollow bars for machining EN 10294-1, E470

Hot rolled seamless heavy wall tubes, EN 10297-1, E355 partially DIN EN 10210-1, S355J2H

Seamless hollow bars for machining EN 10294-1, E470

Seamless hollow bars for machining EN 10294-1, E470

Hot rolled seamless heavy wall tubes, EN 10297-1, E355 partially DIN EN 10210-1, S355J2H

Tubes bored from solid bars, in S355J0, S355J2 or S355J2G3 according to EN 10025, bars may have bezel position

unalloyed heat treatment steel, round, hot-rolled, C35E, grd. 1.1181 after EN ISO 683-1 (EN 10083-2), tolerances after EN 10060

Aluminum round bars, T6 or T6511, pressed, EN AW-6082/AlSiMgMn, WNr3.2315

unalloyed heat treatment steel, round, hot-rolled, C45E, grd. 1.1191 after EN ISO 683-1 (EN 10083-2), tolerances after EN 10060

unalloyed heat treatment steel, round, hot-rolled, C60E, grd. 1.1221 after EN ISO 683-1 (EN 10083-2), tolerances after EN 10060

Alloyed heat-treated steel, round, hot-rolled, 30CrNiMo8+QT, Wst 1.6580 according to EN ISO 683-2 (EN 10083-3) / tolerances EN 10060

cold drawn round steel, S355J2C+C, tol. h9

alloyedheat treatment steel round hot-rolled, 34CrNiMo6+QT, grd. 1.6582 after EN ISO 683-2 (EN 10083-3), tolerances after EN 10060

cold drawn round steel, C45+C/SH, h9

alloyed heat treatment steel, round, hot-rolled, 25CrMo(S)4+QT, grd. 1.7213 / 1.7218 after EN ISO 683-2 (EN 10083-3), tolerances after EN 10060

alloyed heat treatment steel, round, hot-rolled, 42CrMo(S)4+QT, grd. 1.7225/1.7227 after EN ISO 683-2 (EN 10083-3), tolerances after EN 10060

Round cold drawn free-cutting steel, with lead 11SMnPb30/37+C/SH (9SMnP28/36K) Tol. h9

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Hard chromium plated steel bars, according to C45E / C45 / Ck 45, tol. f7/f8 (limited weldable)

alloyed heat treatment steel, round, hot-rolled, 51CrV4+A/+QT, grd. 1.8159 after EN ISO 683-2 (EN 10083-3) / tolerances EN 10060

Hard chromium plated steel bars, inductiv hardened, C45E / C45 / C50 / CK45 / 38MnVS6, tol. f7

Hard chromium plated steel bars, quality 20 Mn V6, Tol. f7

cold drawn round steel, 42CrMoS4+QT+C/SH (1.7225 / 1.7227), tol. h9

case hardened steel, round, hot-rolled, C15E, grd. 1.1141, after EN ISO 683-3 (EN 10084) / tolerances EN 10060

case hardened steel, round, hot-rolled, 15NiCr13+A, Wst 1.5752, after EN ISO 683-3 (EN 10084) / tolerances EN 10060

case hardened steel, round, hot-rolled, 18CrNiMo7-6+A (partially +FP), grd. 1.6587 after EN ISO 683-3 (EN 10084) / tolerances EN 10060

case hardened steel, round, hot-rolled, 16MnCr(S)5 (partially +A), grd. 1.7131/1.7139 after EN ISO 683-3 (EN 10084), tolerances EN 10060

nitrided steel, round, hot-rolled, 31CrMoV9+QT, grd. 1.8519 after EN 10085 / tolerances EN 10060

nitrided steel, round, hot-rolled, 34CrAlNi7-10+QT, grd. 1.855 after EN 10085 / tolerances EN 10060

Anti-frictionbearing steel, round, hot-rolled, 100Cr6+AC, grd. 1.3505 after EN 683-17 / tolerances EN 10060

structural steel, round, hot-rolled, S355J2, EN 10025-2, tolerances EN 10060

structural steel, round, hot-rolled, S355J2+N, after EN 10025-2 / tolerances EN 10060

Stainless steel round bar MatNr. 1.4301, hot rolled, solution annealed EN 10088-3, EN 10060, premachined/peeled, plustolerances

Stainless steel round bar, MatNr. 1.4404, hot rolled, solution annealed EN 10088-3, EN 10060, premachined/peeled, plustolerances

Stainless steel round bar, MatNr. 1.4305, hot rolled, solution annealed EN 10088-3, EN 10060, premachined/peeled, plustolerances

Round cast EN-GJL-250C, EN 16482

Round cast EN-GJS-400-15C

Caro bronze round tube CuSn8P DIN EN 12163

Looser Bronze 50 (LB 50) round tube CuSn7Zn4Pb7-C-GC DIN EN 1982

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Looser Bronze 50 (LB 50) round tube CuSn7Zn4Pb7-C-GC DIN EN 1982

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Looser Bronze 50 (LB 50) round tube CuSn7Zn4Pb7-C-GC DIN EN 1982

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Looser Bronze 50 (LB 50) round tube CuSn7Zn4Pb7-C-GC DIN EN 1982

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Looser Bronze 50 (LB 50) round tube CuSn7Zn4Pb7-C-GC DIN EN 1982

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Looser Bronze 50 (LB 50) round tube CuSn7Zn4Pb7-C-GC DIN EN 1982

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Looser Bronze 50 (LB 50) round tube CuSn7Zn4Pb7-C-GC DIN EN 1982

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Looser Bronze 50 (LB 50) round tube CuSn7Zn4Pb7-C-GC DIN EN 1982

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Looser Bronze 50 (LB 50) round CuSn7Zn4Pb7-C-GC DIN EN 1982

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Looser Bronze 65 (LB 65) round CuSn12-C-GC DIN EN 1982

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Looser Aluminium bronze 75-1 (LAB 75-1) round tube, CuAl10Fe5Ni5-C-GC or GZ DIN EN 1982

Looser Aluminium bronze 75-1 (LAB 75-1) round tube, CuAl10Fe5Ni5-C-GC or GZ DIN EN 1982

Looser Aluminium bronze 75-1 (LAB 75-1) round tube, CuAl10Fe5Ni5-C-GC or GZ DIN EN 1982

Looser Aluminium bronze 75 (LAB 75) round CuAl10Ni5Fe4 Din EN 12163/12167/12420/1653, CW307G (2.0966)

Cold drawn high strength steel, ETG 88

Tolerances: 5.00 mm to 20.50 mm h9 from 20.50 mm to 64.00 mm h11 from 64.00 mm to 114.30 mm h12