Form

unalloyed heat treatment steel, round, hot-rolled, C45E+N, grd. 1.1191 after EN ISO 683-1 (EN 10083-2), tolerances after EN 10060, with certificate 3.1 according to EN 10204, US-tested

unalloyed heat treatment steel, round, hot-rolled, C60E, grd. 1.1221 after EN ISO 683-1 (EN 10083-2), tolerances after EN 10060

Aluminum round bars, T6, pressed, EN AW-6026/AlMgSiBi, RoHS-Conform (partially AW6026lf, leadfree)

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Alloyed heat-treated steel, round, hot-rolled, 30CrNiMo8+QT, Wst 1.6580 according to EN ISO 683-2 (EN 10083-3) / tolerances EN 10060

cold drawn round steel, S355J2C+C, tol. h9

alloyedheat treatment steel round hot-rolled, 34CrNiMo6+QT, grd. 1.6582 after EN ISO 683-2 (EN 10083-3), tolerances after EN 10060

cold drawn round steel, C45+C/SH, h9

alloyed heat treatment steel, round, hot-rolled, 25CrMo(S)4+QT, grd. 1.7213 / 1.7218 after EN ISO 683-2 (EN 10083-3), tolerances after EN 10060

alloyed heat treatment steel, round, hot-rolled, 42CrMo(S)4+QT, grd. 1.7225/1.7227 after EN ISO 683-2 (EN 10083-3), tolerances after EN 10060

Round cold drawn free-cutting steel, with lead 11SMnPb30/37+C/SH (9SMnP28/36K) Tol. h9

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Round cold drawn free-cutting steel, with sulphur 11SMn30 +C/SH Tol. h9, (>Ø160 partially h11)

alloyed heat treatment steel, round, hot-rolled, 51CrV4+A/+QT, grd. 1.8159 after EN ISO 683-2 (EN 10083-3) / tolerances EN 10060

Hard chromium plated steel bars, inductiv hardened, C45E / C45 / C50 / CK45 / 38MnVS6, tol. f7

Hard chromium plated steel bars, quality 20 Mn V6, Tol. f7

case hardened steel, round, hot-rolled, C15E, grd. 1.1141, after EN ISO 683-3 (EN 10084) / tolerances EN 10060

case hardened steel, round, hot-rolled, 15NiCr13+A, Wst 1.5752, after EN ISO 683-3 (EN 10084) / tolerances EN 10060

case hardened steel, round, hot-rolled, 18CrNiMo7-6+A (partially +FP), grd. 1.6587 after EN ISO 683-3 (EN 10084) / tolerances EN 10060

case hardened steel, round, hot-rolled, 16MnCr(S)5 (partially +A), grd. 1.7131/1.7139 after EN ISO 683-3 (EN 10084), tolerances EN 10060

nitrided steel, round, hot-rolled, 31CrMoV9+QT, grd. 1.8519 after EN 10085 / tolerances EN 10060

nitrided steel, round, hot-rolled, 34CrAlNi7-10+QT, grd. 1.855 after EN 10085 / tolerances EN 10060

Anti-frictionbearing steel, round, hot-rolled, 100Cr6+AC, grd. 1.3505 after EN 683-17 / tolerances EN 10060

structural steel, round, hot-rolled, S355J2, EN 10025-2, tolerances EN 10060

structural steel round hot-rolled, P355NL2, grd. 1.1106, normalized after EN 10028-3, tolerances after EN 10060

structural steel, round, hot-rolled, S355J2+N, after EN 10025-2 / tolerances EN 10060

Stainless steel round bar MatNr. 1.4301, hot rolled, solution annealed EN 10088-3, EN 10060, premachined/peeled, plustolerances

Stainless steel round bar, MatNr. 1.4301, grinded h9,solution annealed

Stainless steel round bar, MatNr. 1.4404, hot rolled, solution annealed EN 10088-3, EN 10060, premachined/peeled, plustolerances

Stainless steel round bar, MatNr. 1.4404, grinded h9, solution annealed

Stainless steel round bar, MatNr. 1.4305, hot rolled, solution annealed EN 10088-3, EN 10060, premachined/peeled, plustolerances

Stainless steel round bar, MatNr. 1.4305, grinded h9, solution annealed

Round cast EN-GJL-250C, EN 16482

Stainless steel round bar, MatNr. 1.4112, hot rolled, annealed EN 10088-3, EN 10060, premachined/peeled, plustolerances

Looser Aluminium Bronze 79 (LAB79) round CuAl10.5Ni5.1Fe4.8

Caro bronze round CuSn8P DIN EN 12163

Laiton spécial Looser 22 round CuZn37Mn3Al2PbSi DIN EN 12164

Caro bronze round tube CuSn8P DIN EN 12163

Caro bronze round tube CuSn8P DIN EN 12163

Cold drawn high strength steel, ETG 88

Tolerances: 5.00 mm to 20.50 mm h9 from 20.50 mm to 64.00 mm h11 from 64.00 mm to 114.30 mm h12

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cylinder tubes, welded and cold drawn, St 52-3 or E 355, bore tolerance H 10, bore surface finish max. 1 my Ra

Aluminium pneumatic cylinder tubes, EN AW-6060 or EN AW-6063, anodised, internal surface roughness Ra. max 1.2 my, Tol. H 11 - H 14, in manufacturing lengths of approx. 3.2 metres

Looser Bronze 50 (LB 50) round tube CuSn7Zn4Pb7-C-GC DIN EN 1982

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Looser Bronze 50 (LB 50) round tube CuSn7Zn4Pb7-C-GC DIN EN 1982

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Looser Bronze 50 (LB 50) round tube CuSn7Zn4Pb7-C-GC DIN EN 1982

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Looser Bronze 50 (LB 50) round tube CuSn7Zn4Pb7-C-GC DIN EN 1982

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Looser Bronze 50 (LB 50) round tube CuSn7Zn4Pb7-C-GC DIN EN 1982

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Looser Bronze 50 (LB 50) round tube CuSn7Zn4Pb7-C-GC DIN EN 1982

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Looser Bronze 50 (LB 50) round tube CuSn7Zn4Pb7-C-GC DIN EN 1982

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Looser Bronze 50 (LB 50) round tube CuSn7Zn4Pb7-C-GC DIN EN 1982

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Looser Bronze 50 (LB 50) round tube CuSn7Zn4Pb7-C-GC DIN EN 1982

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Looser Bronze 50 (LB 50) round tube CuSn7Zn4Pb7-C-GC DIN EN 1982

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Looser Bronze 50 (LB 50) round CuSn7Zn4Pb7-C-GC DIN EN 1982

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Looser Bronze 65 (LB 65) round CuSn12-C-GC DIN EN 1982

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Looser Aluminium bronze 75 (LAB 75) round CuAl10Ni5Fe4 Din EN 12163/12167/12420/1653, CW307G (2.0966)

Aluminium pneumatic cylinder tubes, EN AW-6060 or EN AW-6063, anodised, internal surface roughness Ra. max 1.2 my, Tol. H 11 - H 14, in manufacturing lengths of approx. 3.2 metres

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn high strength steel, ETG 88

Tolerances: from 20.50 mm to 64.00 mm h11 from 65.00 mm to 114.30 mm h12

Welded tubes, quality P235 TR1 (St 37.0) according EN 10217-1 (DIN 2458/1626), commercial lengths 6m

Seamless boiler tubes after DIN 2448/17175 in St 35.8/I or after EN 10216-2 in P235GH TC1

Hot rolled seamless heavy wall tubes, EN 10297-1, E355 partially DIN EN 10210-1, S355J2H

HARDOX Tube 500

Welded gas pipes, black, S195T, EN 10255-M (DIN 2440), middle range, plain ends, commercial lengths 6 m

Seamless gas tubes, galvanized DIN 2440/2444, middle range, plain ends, commercial lengths 6 m

Hot rolled seamless heavy wall tubes, EN 10297-1, E355 partially DIN EN 10210-1, S355J2H

Hot rolled seamless heavy wall tubes, EN 10297-1, E355 partially DIN EN 10210-1, S355J2H

Seamless boiler tubes after DIN 2448/17175 in St 35.8/I or after EN 10216-2 in P235GH TC1

Welded tubes, EN 10219, S355J2H

Hot rolled seamless heavy wall tubes, EN 10297-1, E355 partially DIN EN 10210-1, S355J2H

HARDOX Tube 500

Hot rolled seamless heavy wall tubes, EN 10297-1, E355 partially DIN EN 10210-1, S355J2H

Welded tubes, EN 10219, S355J2H

Hot rolled seamless heavy wall tubes, EN 10297-1, E355 partially DIN EN 10210-1, S355J2H