Material

cold drawn round steel, C45+C

cold drawn round steel, C45+C+SL, grinded

Round cold drawn free-cutting steel, with lead 11SMnPb30/37+C/SH (9SMnP28/36K) Tol. h9

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Round cold drawn free-cutting steel, with lead 11SMnPb30/37+C/SH/SL (9SMnP28/36K), tol. h6

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Round cold drawn free-cutting steel, with sulphur 11SMn30 +C/SH Tol. h9

Round cold drawn case hardening steel C15Pb+C (C15PbK) Tol. h9

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Hard chromium plated steel bars, according to Ck 45, tol. f7/f8 (limited weldable)

Hard chromium plated steel bars, quality 42CrMo4+QT, Tol. f7

Cold drawn case hardening steel, 16MnCrS5Pb+C, Tol. h9

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Cold drawn high strength steel, ETG 100

Tolerances: 6.00 mm to 64.00 mm h11 from 64.00 mm to 70.80 mm h12

Cold drawn high strength steel, ETG 100+SL, tol h6, grinded

Brass round bars, CuZn39Pb3/CW614N (Ms58), drawn, acc. EN 12164

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Looser Bronze 50 (LB 50) round, CuSn7Zn4Pb7-C-GC DIN EN 1982 in turning execution Tol. h8 centerless grinded, pointed and chamfered

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Looser Aluminium bronze 75 (LAB 75) round, CuAl10Ni5Fe4 Din EN 12163/12167/12420/1653, CW307G (2.0966)

round bar hot rolled, S235JR

Stainless steel round bar, MatNr. 1.4301, drawn h9

Stainless steel round bar, MatNr. 1.4301, grinded h8

Hard chromed piston rods made of stainless steel, Tol. f7, 1.4301 in fabrication lengths chrome layer thickness: diameter <= 18 mm: >= 14 my diameter >= 20 mm: >= 20 my tolerance: diameter <= 16 mm: ISO f8 diameter >= 18 mm: ISO f7

Stainless steel round bar, MatNr. 1.4404, drawn h9

Stainless steel round bar, MatNr. 1.4305, drawn h9

Stainless steel round bar, MatNr. 1.4305, grinded h8

Threaded rods at 1 m, quality 8.8, bright

Threaded rods at 1 m, quality 8.8, galvanised-blue

Threaded rods at 1 m, INOX A2

Silver steel, 1.2210/115CrV3, DIN175, tol. h8 in productionlenghts of 2 m

Round cold drawn free-cutting steel, with lead 11SMnPb37+C/SH (9SMnP28/36K) Tol. h9

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn seamless steel tubes (HPL), St 37.4, DIN 2391/C, DIN 1630, NBK or EN 10305-4, E 235 + N, bonderized

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn seamless steel tubes (HPL), St 37.4, DIN 2391/C, DIN 1630, NBK or EN 10305-4, E 235 + N, bonderized

Seamless hydraulic line tubes E235 N EN 10305-4, galvanised and passivated, free of chromium 6 on the outside, oiled on the inside

Cylindrical bearing, Métafram BP 25

Cylindrical bearing, Métafram BP 25

Cylindrical bearing, Métafram BP 25

Cylindrical bearing, Métafram BP 25

Cylindrical bearing, Métafram FP 20

Cylindrical bearing, Métafram FP 20

Cylindrical bearing, Métafram FP 20

Seamless steel tubes, stainless EN 10216-5 (DIN 17458), WSt 1.4301 Cold drawn, bright annealed or annealed and pickled, tolerances DIN EN 10305-1 in production lengths of 4 - 6 m

Seamless steel tubes, acid resistant, EN 10216-5, MatNr. 1.4404, drawn, bright annealed or annealed and pickled, tolerances DIN EN 10305-1, production lenghts approx. 6 m

Seamless steel tubes, acid resistant, EN 10216-5, MatNr. 1.4571, drawn, bright annealed or annealed and pickled, tolerances DIN EN 10305-1, production lenghts approx. 6 m

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn seamless steel tubes (HPL), St 37.4, DIN 2391/C, DIN 1630, NBK or EN 10305-4, E 235 + N, oiled

Cold drawn seamless steel tubes (HPL), St 37.4, DIN 2391/C, DIN 1630, NBK or EN 10305-4, E 235 + N, bonderized

Seamless hydraulic line tubes E235 N EN 10305-4, galvanised and passivated, free of chromium 6 on the outside, oiled on the inside

Seamless, non-rusting HPL tubes EN 10216-5 (DIN 17458) delivery condition CFA (m), cold finished, bright annealed tolerances DIN EN 10305-1 (DIN 2391 Part 1) manufacturing lengths of approx. 4 - 6 m ends closed with caps, annealed, material 1.4571

Stainless steel seamless conduit pipes, EN 10216-5, Mat-Nr. 1.4301 cold finished, bright annealed, tolerances EN ISO 1127 (DIN 2462)

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)