Round

Warmarbeitsstahl, Wst 1.2343

Round cold drawn free-cutting steel, with lead 11SMnPb37+C/SH (9SMnP28/36K) Tol. h9

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

cold drawn round steel, S355J2C+C, tol. h9

Aluminum round bars, T6, drawn h9, EN AW-6082/AlSiMgMn, WNr3.2315, chamfered both sides, lenghts 3000 -0/+100

Aluminum round bars, T8/T9, drawn h9, leadfree EN AW-6026/AlMgSiBi, RoHS-Conform

cold drawn round steel, C45+C/SH, h9

Round cold drawn free-cutting steel, with lead 11SMnPb30/37+C/SH (9SMnP28/36K) Tol. h9

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Cold drawn case hardening steel, 16MnCrS5Pb+C, Tol. h9

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

case hardened steel, round, hot-rolled, 16MnCr(S)5 (partially +A), grd. 1.7131/1.7139 after EN ISO 683-3 (EN 10084), tolerances EN 10060

Cold drawn high strength steel, ETG 100

Tolerances: 6.00 mm to 64.00 mm h11 from 64.00 mm to 70.80 mm h12

Looser Aluminium bronze 75 (LAB 75) round CuAl10Ni5Fe4 Din EN 12163/12167/12420/1653, CW307G (2.0966)

Looser sinter bronze Round bar

Aluminum round bars, T66, pressed, EN AW-6060/AlMgSi, WNr3.3206

Aluminum round bars, T6 or T6511, pressed, EN AW-6082/AlSiMgMn, WNr3.2315

unalloyed heat treatment steel, round, hot-rolled, C45E, grd. 1.1191 after EN ISO 683-1 (EN 10083-2), tolerances after EN 10060

Aluminum round bars, T6, pressed, EN AW-6026/AlMgSiBi, RoHS-Conform (partially AW6026lf, leadfree)

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Alloyed heat-treated steel, round, hot-rolled, 30CrNiMo8+QT, Wst 1.6580 according to EN ISO 683-2 (EN 10083-3) / tolerances EN 10060

cold drawn round steel, S355J2C+C, tol. h9

cold drawn round steel, S355J2C+C+SL, tol. h6

alloyedheat treatment steel round hot-rolled, 34CrNiMo6+QT, grd. 1.6582 after EN ISO 683-2 (EN 10083-3), tolerances after EN 10060

cold drawn round steel, C45+C/SH, h9

alloyed heat treatment steel, round, hot-rolled, 25CrMo(S)4+QT, grd. 1.7213 / 1.7218 after EN ISO 683-2 (EN 10083-3), tolerances after EN 10060

cold drawn round steel, C45+C+SL, tol h6 grinded

alloyed heat treatment steel, round, hot-rolled, 42CrMo(S)4+QT, grd. 1.7225/1.7227 after EN ISO 683-2 (EN 10083-3), tolerances after EN 10060

Round cold drawn free-cutting steel, with lead 11SMnPb30/37+C/SH (9SMnP28/36K) Tol. h9

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Round cold drawn free-cutting steel, with lead, ground 11SMnPb30/37+SL (9SMnP28/36K) Tol. h6

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Round cold drawn free-cutting steel, with sulphur 11SMn30 +C/SH Tol. h9, (>Ø160 partially h11)

Round cold drawn case hardening steel C15Pb+C (C15PbK) Tol. h9

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Hard chromium plated steel bars, according to C45E / C45 / Ck 45, tol. f7/f8 (limited weldable)

Cold drawn case hardening steel, 16MnCrS5+A+C/SH, Tol. h9

alloyed heat treatment steel, round, hot-rolled, 51CrV4+A/+QT, grd. 1.8159 after EN ISO 683-2 (EN 10083-3) / tolerances EN 10060

Hard chromium plated steel bars, quality 42CrMo4+QT, Tol. f7

Cold drawn case hardening steel, 16MnCrS5Pb+C, Tol. h9

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Hard chromium plated steel bars, inductiv hardened, 42CrMo4+QT, Tol. f7

Hard chromium plated steel bars, inductiv hardened, C45E / C45 / C50 / CK45 / 38MnVS6, tol. f7

Hard chromium plated steel bars, quality 20 Mn V6, Tol. f7

cold drawn round steel, 42CrMoS4+QT+C/SH (1.7225 / 1.7227), tol. h9

case hardened steel, round, hot-rolled, C15E, grd. 1.1141, after EN ISO 683-3 (EN 10084) / tolerances EN 10060

case hardened steel, round, hot-rolled, 15NiCr13+A, Wst 1.5752, after EN ISO 683-3 (EN 10084) / tolerances EN 10060

case hardened steel, round, hot-rolled, 18CrNiMo7-6+A (partially +FP), grd. 1.6587 after EN ISO 683-3 (EN 10084) / tolerances EN 10060

case hardened steel, round, hot-rolled, 16MnCr(S)5 (partially +A), grd. 1.7131/1.7139 after EN ISO 683-3 (EN 10084), tolerances EN 10060

grinded shafts Cf53 (Mat. 1.1213), h6, inductive hardened in production-lengths

Cold drawn high strength steel, ETG 100

Tolerances: 6.00 mm to 64.00 mm h11 from 64.00 mm to 70.80 mm h12

Cold drawn high strength steel, ETG 100+SL, tol h6, grinded

nitrided steel, round, hot-rolled, 31CrMoV9+QT, grd. 1.8519 after EN 10085 / tolerances EN 10060

nitrided steel, round, hot-rolled, 34CrAlNi7-10+QT, grd. 1.855 after EN 10085 / tolerances EN 10060

Brass round bars, CuZn39Pb3/CW614N (Ms58), drawn, acc. EN 12164

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Anti-frictionbearing steel, round, hot-rolled, 100Cr6+AC, grd. 1.3505 after EN 683-17 / tolerances EN 10060

heat resistantpressure-vessel steelroundhot-rolled, 16Mo3, grd. 1.5415 after EN 10273, tolerances after EN 10060

structural steel, round, hot-rolled, S355J2, EN 10025-2, tolerances EN 10060

structural steel, round, hot-rolled, S355J2+N, after EN 10025-2 / tolerances EN 10060

round bar hot rolled, S235JR

Stainless steel round bar MatNr. 1.4301, hot rolled, solution annealed EN 10088-3, EN 10060, premachined/peeled, plustolerances

Stainless steel round bar, MatNr. 1.4301, grinded h9,solution annealed

Hard chromed piston rods made of stainless steel, Tol. f7, 1.4301 in fabrication lengths chrome layer thickness: diameter <= 18 mm: >= 14 my diameter >= 20 mm: >= 20 my tolerance: diameter <= 16 mm: ISO f8 diameter >= 18 mm: ISO f7

Looser Bronze 50 (LB 50) round, CuSn7Zn4Pb7-C-GC DIN EN 1982 in turning execution Tol. h8 centerless grinded, pointed and chamfered

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Stainless steel round bar, MatNr. 1.4404, hot rolled, solution annealed EN 10088-3, EN 10060, premachined/peeled, plustolerances

Stainless steel round bar, MatNr. 1.4404, grinded h9, solution annealed

Stainless steel round bar, MatNr. 1.4305, hot rolled, solution annealed EN 10088-3, EN 10060, premachined/peeled, plustolerances

Stainless steel round bar, MatNr. 1.4305, grinded h9, solution annealed

Stainless steel round bar, MatNr. 1.4305, grinded h8, solution annealed

Stainless steel round bar, MatNr. 1.4104, grinded h9, annealed

Looser Aluminium bronze 75 (LAB 75) round CuAl10Ni5Fe4 Din EN 12163/12167/12420/1653, CW307G (2.0966)

Round cast EN-GJL-250C, EN 16482

Stainless steel round bar, MatNr. 1.4057, hot rolled, EN 10088-3, EN 10060, premachined/peeled, plustolerances

Stainless steel round bar, MatNr. 1.4057+QT800, grinded h9, quenched and tempered

Stainless steel round bar, MatNr. 1.4112, hot rolled, annealed EN 10088-3, EN 10060, premachined/peeled, plustolerances

Wotan Bronze AKS 59 round CuAl9Fe4Ni1

Caro bronze round CuSn8P DIN EN 12163

Electrode Material round CuCr1Zr DIN EN 12163