Round

Round bars, 100Cr6+AC+C/SH, cold drawn h9

cold drawn round steel, 42CrMoS4+QT+C/SH (1.7225 / 1.7227), tol. h9

Cold drawn high strength steel, ETG 100

Tolerances: 6.00 mm to 64.00 mm h11 from 64.00 mm to 70.80 mm h12

Cold drawn high strength steel, ETG 100+SL, tol h6, grinded

Brass round bars, CuZn39Pb3/CW614N (Ms58), drawn, acc. EN 12164

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Brass round bars, CuZn42/CW510L (57Pb0.1), max. 0.1% lead, drawn h9, EN 12164 (class B), chamfered both sides, lenghts 3 m

Brass round bars, CuZn39Pb3/CW614N (Ms58), drawn h9, acc. EN 12164

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

round bar hot rolled, S235JR

Looser Bronze 50 (LB 50) round CuSn7Zn4Pb7-C-GC DIN EN 1982

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Stainless steel round bar, MatNr. 1.4301, grinded h9,solution annealed

Looser Bronze 50 (LB 50) round, CuSn7Zn4Pb7-C-GC DIN EN 1982 in turning execution Tol. h8 centerless grinded, pointed and chamfered

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Looser Bronze 65 (LB 65) round CuSn12-C-GC DIN EN 1982

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Stainless steel round bar, MatNr. 1.4404, drawn h9, solution annealed

Round bar décolletage 1.4404 AISI 316/316L04L/304 grinded h9 EN 10088-3 – EN 10277 – UNI EN 10308 – ASTM A276 Surface condition 2H EN 10088/3 Cl.3 EN 10277/1 Out of roundness max.: ½ diameter tolerance cold drawn, ground, polished, Ra max. 0.4 µm (N5) EN 10278 0.50 mm/m max Crack test (Eddy current) - EN 10277/1 Cl. 3 in lengths of 3 m -0/+100 mm

Stainless steel round bar, MatNr. 1.4305, drawn h9, solution annealed

Stainless steel round bar, MatNr. 1.4305, grinded h9, solution annealed

Stainless steel round bar, MatNr. 1.4305, grinded h8, solution annealed

Round bar décolletage 1.4104 AISI 430F grinded h7 EN 10088-3 – EN10277 – UNI EN 10308 – ASTM A276 Surface condition 2H EN 10088/3 Cl.3 EN 10277/1 Out of roundness max.: ½ diameter tolerance cold drawn, ground, polished, Ra max. 0.4 µm (N5) EN 10278 0.50 mm/m max Crack test (Eddy current) - EN 10277/1 Cl. 3 in lengths of 3 m -0/+100 mm

Looser Aluminium bronze 75 (LAB 75) round CuAl10Ni5Fe4 Din EN 12163/12167/12420/1653, CW307G (2.0966)

Wotan Bronze AKS 59 round CuAl9Fe4Ni1

Caro bronze round CuSn8P DIN EN 12163

Round bar décolletage 1.4435 AISI 316L grinded h7 EN 10088-3 – EN 10277 – UNI EN 10308 – ASTM A276 – ASTMA 479 Surface condition 2H EN 10088/3 Cl.3 EN 10277/1 Out of roundness max.: ½ diameter tolerance cold drawn, ground, polished, Ra max. 0.4 µm (N5) EN 10278 0.50 mm/m max Crack test (Eddy current) - EN 10277/1 Cl. 3 in lengths of 3 m -0/+100 mm

Lobrodur 18 round CuNi2Si DIN EN 12163

Laiton spécial Looser 22 round CuZn37Mn3Al2PbSi DIN EN 12164

Laiton spécial Looser 22 round CuZn37Mn3Al2PbSi DIN EN 12164

Silberstahl, 1.2210/115CrV3, DIN175, inkl. Werkszeugnis nach EN 10204/3.1 Toleranzen: 1.00 mm bis 2.50 mm h9 ab 3.00 mm h8

Wotan Bronze AKS 59 round CuAl9Fe4Ni1

Aluminum round bars, T8/T9, drawn, EN AW-6026lf/AlMgSiBi, leadfree

cold drawn round steel, S355J2C+C, tol. h9

cold drawn round steel, S355J2C+C+SL, tol. h6

Aluminum round bars, T6, drawn h9, EN AW-6082/AlSiMgMn, WNr3.2315, chamfered both sides, lenghts 3000 -0/+100

Aluminum round bars, T8/T9, drawn h9, leadfree EN AW-6026/AlMgSiBi, RoHS-Conform

cold drawn round steel, C45E+C/SH, Tol. h9

cold drawn round steel, C45+C+SL, tol h6 grinded

Round cold drawn free-cutting steel, with lead 11SMnPb30/37+C/SH (9SMnP28/36K) Tol. h9

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Round cold drawn free-cutting steel, with lead, ground 11SMnPb30/37+SL (9SMnP28/36K) Tol. h6

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Round cold drawn free-cutting steel, with sulphur 11SMn30 +C/SH Tol. h9

Round cold drawn case hardening steel C15Pb+C (C15PbK) Tol. h9

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Hard chromium plated steel bars, according to C45E / C45 / Ck 45, tol. f7/f8 (limited weldable)

Hard chromium plated steel bars, quality 42CrMo4+QT, Tol. f7

Cold drawn case hardening steel, 16MnCrS5Pb+C, Tol. h9

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Hard chromium plated steel bars, quality 20 Mn V6, Tol. f7

cold drawn round steel, 42CrMoS4+QT+C/SH (1.7225 / 1.7227), tol. h9

grinded shafts Cf53 (Mat. 1.1213), h6, inductive hardened in production-lengths

Cold drawn high strength steel, ETG 100

Tolerances: 6.00 mm to 64.00 mm h11 from 64.00 mm to 70.80 mm h12

Cold drawn high strength steel, ETG 100+SL, tol h6, grinded

Brass round bars, CuZn39Pb3/CW614N (Ms58), drawn, acc. EN 12164

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Brass round bars, CuZn39Pb3/CW614N (Ms58), drawn h9, acc. EN 12164

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

round bar hot rolled, S235JR

Looser Bronze 50 (LB 50) round CuSn7Zn4Pb7-C-GC DIN EN 1982

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Stainless steel round bar, MatNr. 1.4301, grinded h9,solution annealed

Hard chromed piston rods made of stainless steel, Tol. f7, 1.4301 in fabrication lengths chrome layer thickness: diameter <= 18 mm: >= 14 my diameter >= 20 mm: >= 20 my tolerance: diameter <= 16 mm: ISO f8 diameter >= 18 mm: ISO f7

Looser Bronze 50 (LB 50) round, CuSn7Zn4Pb7-C-GC DIN EN 1982 in turning execution Tol. h8 centerless grinded, pointed and chamfered

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Stainless steel round bar, MatNr. 1.4404, grinded h9, solution annealed

Stainless steel round bar, MatNr. 1.4305, grinded h9, solution annealed

Stainless steel round bar, MatNr. 1.4305, grinded h8, solution annealed

Round bar décolletage 1.4104 AISI 430F grinded h7 EN 10088-3 – EN10277 – UNI EN 10308 – ASTM A276 Surface condition 2H EN 10088/3 Cl.3 EN 10277/1 Out of roundness max.: ½ diameter tolerance cold drawn, ground, polished, Ra max. 0.4 µm (N5) EN 10278 0.50 mm/m max Crack test (Eddy current) - EN 10277/1 Cl. 3 in lengths of 3 m -0/+100 mm

Looser Aluminium bronze 75 (LAB 75) round CuAl10Ni5Fe4 Din EN 12163/12167/12420/1653, CW307G (2.0966)

Threaded rods at 2 m, quality 4.6/4.8, galvanised-blue

Threaded rods at 1 m, quality 8.8, bright

Threaded rods at 1 m, quality 8.8, galvanised-blue

Threaded rods at 1 m, INOX A2

Stainless steel round bar, MatNr. 1.4057+QT800, grinded h9, quenched and tempered

Round bar décolletage 1.4112 AISI 440B grinded h7 EN 10088-3 – EN10277 – UNI EN 10308 – ASTM A276 "excluding Mo-content" Surface condition 2H EN 10088/3 Cl.3 EN 10277/1 Out of roundness max.: ½ diameter tolerance cold drawn, ground, polished, Ra max. 0.4 µm (N5) EN 10278 0.50 mm/m max Crack test (Eddy current) - EN 10277/1 Cl. 3 in lengths of 3 m -0/+100 mm

Caro bronze round CuSn8P DIN EN 12163

Round bar décolletage 1.4435 AISI 316L grinded h7 EN 10088-3 – EN 10277 – UNI EN 10308 – ASTM A276 – ASTMA 479 Surface condition 2H EN 10088/3 Cl.3 EN 10277/1 Out of roundness max.: ½ diameter tolerance cold drawn, ground, polished, Ra max. 0.4 µm (N5) EN 10278 0.50 mm/m max Crack test (Eddy current) - EN 10277/1 Cl. 3 in lengths of 3 m -0/+100 mm

Electrode Material Round bar CuCo2Be DIN EN 12163

Electrode Material round CuCr1Zr DIN EN 12163

Lobrodur 18 round CuNi2Si DIN EN 12163

Laiton spécial Looser 22 round CuZn37Mn3Al2PbSi DIN EN 12164

Silberstahl, 1.2210/115CrV3, DIN175, inkl. Werkszeugnis nach EN 10204/3.1 Toleranzen: 1.00 mm bis 2.50 mm h9 ab 3.00 mm h8

cold drawn round steel, S355J2C+C, tol. h9

Aluminum round bars, T8/T9, drawn h9, leadfree EN AW-6026/AlMgSiBi, RoHS-Conform

cold drawn round steel, C45+C+SL, tol h6 grinded

Round cold drawn free-cutting steel, with lead 11SMnPb30/37+C/SH (9SMnP28/36K) Tol. h9

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Cold drawn high strength steel, ETG 100

Tolerances: 6.00 mm to 64.00 mm h11 from 64.00 mm to 70.80 mm h12