Form

Cylindrical bearing, Métafram BP 25

Cylindrical bearing, Métafram BP 25

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

cold drawn round steel, S355J2C+C, tol. h9

cold drawn round steel, C45+C+SL, tol h6 grinded

Round cold drawn free-cutting steel, with lead 11SMnPb30/37+C/SH (9SMnP28/36K) Tol. h9

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Round cold drawn free-cutting steel, with lead 11SMnPb30/37+C/SH/SL (9SMnP28/36K), tol. h6

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Round cold drawn free-cutting steel, with sulphur 11SMn30 +C/SH Tol. h9, (>Ø160 partially h11)

Cold drawn heat treatable steel, with lead C45Pb+C (C45PbK) Tol. h9

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Cold drawn high strength steel, ETG 100

Tolerances: 6.00 mm to 64.00 mm h11 from 64.00 mm to 70.80 mm h12

Cold drawn high strength steel, ETG 100+SL, tol h6, grinded

Brass round bars, CuZn39Pb3/CW614N (Ms58), drawn, acc. EN 12164

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Brass round bars, CuZn39Pb3/CW614N (Ms58), drawn h9, acc. EN 12164

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Round bar décolletage 1.4404 AISI 316/316L04L/304 grinded h6 EN 10088-3 – EN 10277 – UNI EN 10308 – ASTM A276 Surface condition 2H EN 10088/3 Cl.3 EN 10277/1 Out of roundness max.: ½ diameter tolerance cold drawn, ground, polished, Ra max. 0.4 µm (N5) EN 10278 0.50 mm/m max Crack test (Eddy current) - EN 10277/1 Cl. 3 in lengths of 3 m -0/+100 mm

Round bar décolletage 1.4305 AISI 303 grinded h7 EN 10088-3 – EN 10277 – UNI EN 10308 – ASTM A276 Surface condition 2H EN 10088/3 Cl.3 EN 10277/1 Out of roundness max.: ½ diameter tolerance cold drawn, ground, polished, Ra max. 0.4 µm (N5) EN 10278 0.50 mm/m max Crack test (Eddy current) - EN 10277/1 Cl. 3 in lengths of 3 m -0/+100 mm

Round bar décolletage 1.4104 AISI 430F grinded h7 EN 10088-3 – EN10277 – UNI EN 10308 – ASTM A276 Surface condition 2H EN 10088/3 Cl.3 EN 10277/1 Out of roundness max.: ½ diameter tolerance cold drawn, ground, polished, Ra max. 0.4 µm (N5) EN 10278 0.50 mm/m max Crack test (Eddy current) - EN 10277/1 Cl. 3 in lengths of 3 m -0/+100 mm

Wotan Bronze AKS 59 round CuAl9Fe4Ni1

Caro bronze round CuSn8P DIN EN 12163

Round bar décolletage 1.4435 AISI 316L grinded h7 EN 10088-3 – EN 10277 – UNI EN 10308 – ASTM A276 – ASTMA 479 Surface condition 2H EN 10088/3 Cl.3 EN 10277/1 Out of roundness max.: ½ diameter tolerance cold drawn, ground, polished, Ra max. 0.4 µm (N5) EN 10278 0.50 mm/m max Crack test (Eddy current) - EN 10277/1 Cl. 3 in lengths of 3 m -0/+100 mm

Round bar décolletage 1.4035 (1.4034+S) AISI 420F grinded h7 EN 10088-3 – EN 10277 – UNI EN 10308 – ASTM A276 Surface condition 2H EN 10088/3 Cl.3 EN 10277/1 Out of roundness max.: ½ diameter tolerance cold drawn, ground, polished, Ra max. 0.4 µm (N5) EN 10278 0.50 mm/m max Crack test (Eddy current) - EN 10277/1 Cl. 3 in lengths of 3 m -0/+100 mm

Silver steel, 1.2210/115CrV3, DIN175, tol. h8 in productionlenghts of 2 m

Round cold drawn free-cutting steel, with lead 11SMnPb30/37+C/SH (9SMnP28/36K) Tol. h9

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Brass round bars, CuZn39Pb3/CW614N (Ms58), drawn h9, acc. EN 12164

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Cylindrical bearing, Métafram FP 20

Permaglide P10/P14 Flanged bushing

Permaglide P11 Flanged bushing

Looser bearing LG 41 Cylindrical bushing

Flanged bearing C, Métafram FP 20

Permaglide P10/P14 Flanged bushing

Permaglide P10/P14 Cylindrical bushing

Cylindrical bearing, Métafram FP 20

Looser bearing LG 41 Cylindrical bushing

Permaglide P10/P14 Flanged bushing

Permaglide P10/P14 Cylindrical bushing

Cylindrical bearing, Métafram FP 20

Looser sinter bronze A51 Cylindrical bushing

Looser bearing LG 41 Cylindrical bushing

Permaglide P10/P14 Cylindrical bushing

Permaglide P11 Cylindrical bushing

Looser sinter bronze Round bar

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn seamless steel tubes (HPL), St 37.4, DIN 2391/C, DIN 1630, NBK or EN 10305-4, E 235 + N, oiled

Cold drawn seamless steel tubes (HPL), St 37.4, DIN 2391/C, DIN 1630, NBK or EN 10305-4, E 235 + N, bonderized

Seamless hydraulic line tubes E235 N EN 10305-4, galvanised and passivated, free of chromium 6 on the outside, oiled on the inside

Seamless steel tubes, acid resistant, EN 10216-5, MatNr. 1.4404, drawn, bright annealed or annealed and pickled, tolerances DIN EN 10305-1, production lenghts approx. 6 m

Seamless steel tubes, acid resistant, EN 10216-5, MatNr. 1.4571, drawn, bright annealed or annealed and pickled, tolerances DIN EN 10305-1, production lenghts approx. 6 m

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn seamless steel tubes (HPL), St 37.4, DIN 2391/C, DIN 1630, NBK or EN 10305-4, E 235 + N, bonderized

Seamless hydraulic line tubes E235 N EN 10305-4, galvanised and passivated, free of chromium 6 on the outside, oiled on the inside

Cylindrical bearing, Métafram BP 25

Cylindrical bearing, Métafram BP 25

Cylindrical bearing, Métafram BP 25

Seamless steel tubes, acid resistant, EN 10216-5, MatNr. 1.4571, drawn, bright annealed or annealed and pickled, tolerances DIN EN 10305-1, production lenghts approx. 6 m

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn seamless steel tubes (HPL), St 37.4, DIN 2391/C, DIN 1630, NBK or EN 10305-4, E 235 + N, bonderized

Seamless hydraulic line tubes E235 N EN 10305-4, galvanised and passivated, free of chromium 6 on the outside, oiled on the inside

Flanged bearing C, Métafram BP 25

Flanged bearing C, Métafram BP 25

Flanged bearing C, Métafram BP 25

Cylindrical bearing, Métafram BP 25

Cylindrical bearing, Métafram BP 25

Cylindrical bearing, Métafram BP 25

Cylindrical bearing, Métafram BP 25

Flanged bearing C, Métafram FP 20

Flanged bearing C, Métafram FP 20

Flanged bearing C, Métafram FP 20

Cylindrical bearing, Métafram FP 20

Cylindrical bearing, Métafram FP 20

Cylindrical bearing, Métafram FP 20

Seamless steel tubes, acid resistant, EN 10216-5, MatNr. 1.4571, drawn, bright annealed or annealed and pickled, tolerances DIN EN 10305-1, production lenghts approx. 6 m

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Aluminum round bars, T66, pressed, EN AW-6060/AlMgSi, WNr3.3206

Aluminum round bars, T6 or T6511, pressed, EN AW-6082/AlSiMgMn, WNr3.2315