Form

Cylindrical bearing, Métafram BP 25

Cylindrical bearing, Métafram BP 25

Cylindrical bearing, Métafram BP 25

Cylindrical bearing, Métafram BP 25

Cylindrical bearing, Métafram FP 20

Cylindrical bearing, Métafram FP 20

Seamless steel tubes, stainless EN 10216-5 (DIN 17458), WSt 1.4301 Cold drawn, bright annealed or annealed and pickled, tolerances DIN EN 10305-1 in production lengths of 4 - 6 m

Seamless steel tubes, acid resistant, EN 10216-5, MatNr. 1.4571, drawn, bright annealed or annealed and pickled, tolerances DIN EN 10305-1, production lenghts approx. 6 m

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn seamless steel tubes (HPL), St 37.4, DIN 2391/C, DIN 1630, NBK or EN 10305-4, E 235 + N, bonderized

Seamless hydraulic line tubes E235 N EN 10305-4, galvanised and passivated, free of chromium 6 on the outside, oiled on the inside

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn seamless steel tubes (HPL), St 37.4, DIN 2391/C, DIN 1630, NBK or EN 10305-4, E 235 + N, bonderized

Flanged bearing C, Métafram BP 25

Flanged bearing C, Métafram BP 25

Flanged bearing C, Métafram BP 25

Flanged bearing C, Métafram BP 25

Cylindrical bearing, Métafram BP 25

Cylindrical bearing, Métafram BP 25

Cylindrical bearing, Métafram BP 25

Cylindrical bearing, Métafram BP 25

Flanged bearing C, Métafram FP 20

Flanged bearing C, Métafram FP 20

Flanged bearing C, Métafram FP 20

Cylindrical bearing, Métafram FP 20

Cylindrical bearing, Métafram FP 20

Cylindrical bearing, Métafram FP 20

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

Cold drawn seamless precision steel tubes, as drawn condition according EN 10305-1, E 235 + C, oiled (partly material E 355)

unalloyed heat treatment steel, round, hot-rolled, C45E, grd. 1.1191 after EN ISO 683-1 (EN 10083-2), tolerances after EN 10060

unalloyed heat treatment steel, round, hot-rolled, C60E, grd. 1.1221 after EN ISO 683-1 (EN 10083-2), tolerances after EN 10060

Aluminum round bars, T8/T9, drawn, EN AW-6026/AlMgSiBi, RoHS-Conform (partially AW6026lf, leadfree)

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

cold drawn round steel, S355J2C+C, tol. h9

Aluminum round bars, T6, drawn h9, EN AW-6082/AlSiMgMn, WNr3.2315, chamfered both sides, lenghts 3000 -0/+100

Aluminum round bars, T8/T9, drawn h9, leadfree EN AW-6026/AlMgSiBi, RoHS-Conform

cold drawn round steel, C45+C/SH, h9

alloyed heat treatment steel, round, hot-rolled, 42CrMo(S)4+QT, grd. 1.7225/1.7227 after EN ISO 683-2 (EN 10083-3), tolerances after EN 10060

Round cold drawn free-cutting steel, with lead 11SMnPb30/37+C/SH (9SMnP28/36K) Tol. h9

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Round cold drawn free-cutting steel, with sulphur 11SMn30 +C/SH Tol. h9, (>Ø160 partially h11)

Round cold drawn case hardening steel C15Pb+C (C15PbK) Tol. h9

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Hard chromium plated steel bars, according to C45E / C45 / Ck 45, tol. f7/f8 (limited weldable)

Cold drawn case hardening steel, 16MnCrS5+A+C/SH, Tol. h9

Hard chromium plated steel bars, quality 42CrMo4+QT, Tol. f7

Cold drawn case hardening steel, 16MnCrS5Pb+C, Tol. h9

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Hard chromium plated steel bars, quality 20 Mn V6, Tol. f7

cold drawn round steel, 42CrMoS4+QT+C/SH (1.7225 / 1.7227), tol. h9

case hardened steel, round, hot-rolled, 16MnCr(S)5 (partially +A), grd. 1.7131/1.7139 after EN ISO 683-3 (EN 10084), tolerances EN 10060

Cold drawn high strength steel, ETG 100

Tolerances: 6.00 mm to 64.00 mm h11 from 64.00 mm to 70.80 mm h12

Cold drawn high strength steel, ETG 100+SL, tol h6, grinded

Brass round bars, CuZn39Pb3/CW614N (Ms58), drawn, acc. EN 12164

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Brass round bars, CuZn39Pb3/CW614N (Ms58), drawn h9, acc. EN 12164

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

round bar hot rolled, S235JR

Stainless steel round bar, MatNr. 1.4301, grinded h9,solution annealed

Hard chromed piston rods made of stainless steel, Tol. f7, 1.4301 in fabrication lengths chrome layer thickness: diameter <= 18 mm: >= 14 my diameter >= 20 mm: >= 20 my tolerance: diameter <= 16 mm: ISO f8 diameter >= 18 mm: ISO f7

Looser Bronze 50 (LB 50) round, CuSn7Zn4Pb7-C-GC DIN EN 1982 in turning execution Tol. h8 centerless grinded, pointed and chamfered

REACH-information according to Art. 33 of the Reach Regulation: Lead content > 0.10 % (mass fraction)

Stainless steel round bar, MatNr. 1.4404, grinded h9, solution annealed

Stainless steel round bar, MatNr. 1.4305, grinded h9, solution annealed

Stainless steel round bar, MatNr. 1.4305, grinded h6, solution annealed

Stainless steel round bar, MatNr. 1.4104, grinded h8, annealed

Looser Aluminium bronze 75 (LAB 75) round CuAl10Ni5Fe4 Din EN 12163/12167/12420/1653, CW307G (2.0966)

Looser Aluminium Bronze 75 Sheet CuAl10Ni5Fe4 DIN EN 1653

Threaded rods at 1 m, quality 8.8, bright

Threaded rods at 1 m, quality 8.8, galvanised-blue

Threaded rods at 1 m, INOX A2

Caro bronze round CuSn8P DIN EN 12163

Round bar décolletage 1.4435 AISI 316L grinded h9 EN 10088-3 – EN 10277 – UNI EN 10308 – ASTM A276 – ASTMA 479 Surface condition 2H EN 10088/3 Cl.3 EN 10277/1 Out of roundness max.: ½ diameter tolerance cold drawn, ground, polished, Ra max. 0.4 µm (N5) EN 10278 0.50 mm/m max Crack test (Eddy current) - EN 10277/1 Cl. 3 in lengths of 3 m -0/+100 mm

Lobrodur 18 round CuNi2Si DIN EN 12163

Laiton spécial Looser 22 round CuZn37Mn3Al2PbSi DIN EN 12164

Silver steel, 1.2210/115CrV3, DIN175, tol. h8 in productionlenghts of 2 m

Caro bronze round tube CuSn8P DIN EN 12163

Wieland-B09-ST Cylindrical bushing

Permaglide P10/P14 Flanged bushing